Close sidebar
EnglishFrançaisEspañol

The tasting guide

How to have the best experience with your beer?

A guide in three chapters to discover the steps of beer tasting.

Even if you are not an experienced gourmet, you can appreciate all the flavors of your beer if you taste it quietly. Tasting a beer involves the taste, but the sight and the smell also contribute. You need to know some tips to have the best tasting experience. The three following chapters describe step by step what you must know to enjoy your beer.

1. Get ready for tasting

a) The environment

Tasting a beer must be performed in a quiet atmosphere and a nice ambience. You need to take your time: you cannot taste a beer if you are in a hurry.

To avoid:

  • Disturbing odors (cigarette smoke, perfume, cooking odors, …),
  • A place where it is difficult to focus (bar, supermarket, …).

b) The glass

Each beer has its own preferred glass. If you choose the right glass, you will better enjoy the aroma, the foam, the color, etc.

As it is difficult to get the adequate glass for each beer you want to taste, you can use a tasting glass instead. It must be big enough (greater than 20 cl) so that it can contain enough beer when it is half full. This should of course be a goblet; we will see why below.

The glass must be dry and clean in order to evaluate the foam correctly. Greasy agents will kill the beer foam: it is important to rinse the glass with cold water and let it air dry before you serve the beer. Between each tasting, you should wash your glass to avoid taste residue from your last beer.

To avoid:

  • Too small a glass (smaller than 20 cl),
  • A dirty glass, or a glass with taste residue (dishwashing soap, …).

c) The beer

The type of beer you have selected is very important, because it defines the adequate tasting temperature and the type of glass. Not all beers are drunk the same way (in general, the label provides this information):

  • Some cold: 5°C to 6°C,
  • Others at cellar temperature: 10°C to 15°C,
  • Some warm: around 70°C.

When looking at a beer, pay attention to three elements: the foam must adhere to the walls of the glass, the bubbles should be small and regular and, finally, the color should be bright, except for beers on yeast, like white beers.

To avoid:

  • Not following adequate temperatures prevents the beer from revealing its flavor.

d) You

You should take your time for a successful tasting. Above all, avoid a mouth sullied by other tastes: they completely distort the taste of beer. Before starting your tasting, nibble a small piece of bread to clean your palate.

To avoid:

  • A spicy meal before tasting,
  • Hard liquor before tasting,
  • Being rushed or stressed.

2. Serve the beer

Open the bottle gently without shaking it. Then take the glass with one hand by the foot (not from below, to prevent your hand from warming the beer and distorting the tasting).

With the other hand, pour the beer gently and gradually move the bottle away from the glass as it fills up, so as to create a beautiful head of foam. The head should be three to four centimeters on average. The head is essential because:

  • To fully appreciate the flavors of a beer, you need a head through which the bubbles release the spices and other flavors that make up its bouquet,
  • The head of foam protects the beer against air and prevents the taste from being altered by oxidation.

Once the head of foam is formed, tilt the glass to raise the liquid under the foam and thus control the thickness of the head, which is expected to persist until the end. Fill the glass up to half.

Next, slowly swirl your beer in your glass. The gentle motion allows the liquid to agitate, unlocking the beer's subtle distinctions of consistency, aroma and carbonation: small factors that greatly enhance the beer's character.

To avoid:

  • Shaking the bottle before opening it,
  • Pouring the beer into the glass too quickly,
  • Filling more than half of the glass (a glass that is too full prevents you from swirling it and smelling the aromas that emerge),
  • Holding the glass by the bottom or the side (you risk warming the beer with the warmth of your hands),
  • Getting a beer without foam, or with too much foam.

Train yourself to serve a beer with the draft beer dispensing system simulator.

Did you know?

Beer head (also head) is the frothy foam on top of beer which is produced by bubbles of gas, typically carbon dioxide, rising to the surface. The elements that produce the head are wort protein, yeast and hop residue. The carbon dioxide that forms the bubbles in the head is produced during fermentation. The carbonation can occur before or after bottling the beer. If the beer continues fermenting in the bottle, then it naturally carbonates and the head is formed upon opening and/or pouring the beer.

3. Tasting

There are three essential steps in tasting a beer:

  • The sight - Observe the beer: color, foam, …
  • The smell - Smell the beer to smell the aroma that emanates,
  • The taste - Taste the beer to feel all the flavors. Unlike wine, you must swallow a mouthful to also assess the aftertaste.

Some speak of another step, involving the hearing, which consists of putting the glass near one's ear to hear the crackling of the beer.

a) Observe the beer

The first thing we see: the color. It can be amber, white (cloudy), blond, brown, dark red, dark brown, golden blond, purple, amber-purple, black, orange-blond, amber-pink, bright red, blond on lees, cloudy blond, …. The color of the beer is not related to the quality of the beer; its color comes from the malts, the fruit and sometimes coloring syrups.

Then we can observe the transparency or clarity of the beer. Generally, a beer that is not clear but cloudy or even hazy is a sign of poor quality. This criterion does not apply to beers whose characteristic is to be cloudy, like white beers.

The foam should be formed of fine bubbles (less than 1 mm in diameter). Proper foam should be white, stay white and disintegrate after two to three minutes. When the level of beer in your glass goes down, the foam is deposited on the glass walls and leaves traces. These traces are called lacing. A good lacing (regular, with no big holes) is positive.

b) Smell the beer

Smell and taste are closely linked, so to enjoy a beer to its fullest, take time to savor its aroma.
Beer contains more than 650 aromatic compounds; you must first smell it without moving the glass to capture the dominant scent. You can then swirl the beer in the glass to release the secondary aromas.

c) Taste the beer

The key here is to take your time. Have a sip, and before you swallow, let the beer flow over your taste buds (sweet, salty, sour, and bitter). Swirl it around just a bit, so every part of your mouth has contact. Breathe at the same time for the flavors to come to you again. That way, you'll be able to appreciate every nuance of the beer's body, character, and flavors. Then, of course, repeat.

Then enjoy the aftertaste: the perception of taste that remains after the beer has left the mouth. It can be pronounced or subtle, persistent or fleeting. The flavor notes present in the aftertaste can be very different from those which dominate the taste in the mouth.

Share this guide

To go furtherPractice serving

The beer tap game